1993-1995 RX-7 Clutch & Flywheel

Over the many years of racing we have tried many brands of clutches, and haven't found any capable of holding or lasting for
very long at the power levels that we are making. At the track, or on the street, the ACT simply is the best.

ACT Clutch FAQ's

Aluminum Flywheel FAQ's

Click Pictures

The Heavy Duty pressure plate offers about 35-40% increase in clamping pressure.

The next step up is the Extreme Duty pressure plate. It has about 100% increase in clamping pressure.
Clutch Technical Bulletins


93-95 RX-7 ACT Clutch Kits

Heavy Duty Street/Strip or Race complete clutch set with pilot bearing, throw out bearing, pilot bearing seal and alignment tool. $629 Part Number AC-13116

Xtreme Duty Street/Strip or Race complete clutch set with pilot bearing, throw out bearing, pilot bearing seal and alignment tool. $649 Part Number AC-13116XT

All clutch sets come complete with throw-out bearings, pilot bearings seals and alignment tool.



1993-1995 RX-7
OEM Factory complete clutch set.
$429

Part Number AC-13117

Our clutch sets come complete with throw-out bearings, pilot bearings seals and alignment tool.


- Internet Special -


1993-1995 RX-7
lightweight flywheel, counterweight, hardware kit, throw out bearing, pilot bearing, pilot bearing seal, alignment tool, and complete Heavy Duty clutch set.
(race or street/strip)

SALE $1049 Thru Friday $1189

Part Number PK-12189

**add $289 for 9.25# aluminum flywheel



1993-1995 RX-7

lightweight flywheel, counterweight, hardware kit, throw out bearing, pilot bearing, pilot bearing seal, alignment tool, and complete Extreme clutch set. (race or street/strip)

SALE $1099 Thru Friday $1229

Part Number PK-12189XT

**add $289 for 9.25# aluminum flywheel

Chrome Moly 14.5 pounds

Good

Lower cost, although not as much performance than the billet aluminum flywheel. 1 piece construction.

Billet Aluminum 9.25 pounds

Best

Slightly more money , but with much more performance. Fully rebuildable, with all parts in stock.

 

All clutch sets come complete with throw-out bearings, pilot bearings, seals and alignment tool.

 

Product Description

 

Heavy Duty Pressure Plates
Great holding power, better 60ft & 1/4 mile times, and long life are all benefits that come along with these plates. What makes our pressure plates the highest standard of the industry? First, we start off with new units. We do not offer rebuilds (except for special circumstances or warrantee work). Second, we increase the pressure the right way: by changing the diaphragm. The diaphragms are specially heat treated through an exclusive 3 stage process and then hardened on the release bearing contact area to reduce wear. Third, we make sure that the pressure curve and release travel of the unit is in the right working range. Forth, we use proven assembly procedures that insures consistency and precision. Finally, we accurately balance and test every unit we produce. No guesswork, no hype, only proven engineering and calculated results.


Extreme Pressure Plates
The maximum holding power available! Our solution: apply more diaphragm pressure. With a less aggressive street disc, this makes a great combination for high HP street cars that prefer smooth engagement. For racing, combine our Extreme Pressure Plate with our race disc for the ultimate in torque capacity and durability. What makes these units so unique is a radical increase in pressure without altering the proper geometry or stacking of diaphragms. The result is maximum holding pressure and long life, while maintaining good release clearance for fast, clean shifting. This can only be done with a specially engineered diaphragm. On some units, like the one shown above, we actually include gusseting the cover to reduce flex caused by the the high pressure. These are made with the same high standard as our heavy duty pressure plates. You will find these on many of the fastest cars on the track. How do they feel? A little stiff, but smooth! Extreme Pressure Plates can be identified throughout the application chart when the pressure plate number is followed by a suffix "X".


The clutch disc is a very important part of the system.
We offer a full faced street/strip organic lining for most applications. It has the highest quality lining available. It will hold a lot of power. For those of you that want the ultimate holding power we suggest the 6 puck ceramic copper race disc. Not for the timid driver, this disc will hold much more power than any other clutch will. We can supply any combination of pressure plate and discs.


 

Product Description

 

Street / Strip Discs
Organic, spring center replacement disc designed for smooth engagement, quiet operation and improved durability. We offer the best brands for the application. Street discs can be used with moderate to heavy duty applications including racing depending on torque output and heat. View our application chart for more information on torque capacity. Some times a special performance organic disc is available. These discs use special performance linings that are designed to withstand high heat and high RPM. When the suffix "M" appears, the disc has been modified by reducing the marcel enabling quicker action.


Copper Ceramic Race Discs
Available in 6 pad design. These pads (pucks, buttons) are highly durable and resistant to heat. They actually perform better when hot! The copper ceramic material holds approximately 32% more torque than an organic lining. Copper ceramic discs engage fairly harsh and are not normally recommended for street use. The high copper content of the material helps to absorb heat and reduce the temperature of the mating parts. Shifting is quick and sure due to the lightweight rigid design. No worries about broken center sections or springs. They are well suited for smaller disc sizes from smaller engines.


Click Picture

Our flywheels are fully rebuildable, not like disposable steel and chrome moly flywheels which cannot be rebuilt*** We have all rebuild parts in stock.

Click Picture

***SR flywheels come with custom stepped dowels that cannot ever come loose, or fall out ***

Aluminum Flywheels
Available in 9.5 or 11 pound design. These lightweight 6061 T6 billet SR Motorsports aluminum flywheels are designed to for the street, track or dragrace RX-7.They free up horsepower by reducing power robbing rotating mass. We offer both a 9.5 and 11 pound unit. Our flywheels are fully rebuildable, not like disposable steel and chrome moly flywheels which cannot be rebuilt*** We have all rebuild parts in stock. ( The 7 to 8 pound racing flywheels that our competitors offer are too light for a street car ) The stock flywheels are 20-28 pounds! Shifting is quick and sure due to the lightweight aluminum billet design. Longer transmission life can also be expected. The high carbon steel content of the replaceable bolt-on heat shield material helps to absorb heat and reduce the temperature of the mating parts. Our application chart lists only those aluminum flywheels used with our ACT clutch kits although we fit many other cars not listed on our chart. If you have any questions regarding applications not listed, consult us.



 

Product Description

 

Click Picture

Our flywheels are fully rebuildable, not like disposable steel and chrome moly flywheels which cannot be rebuilt*** We have all rebuild parts in stock.

9.5 pound aluminum flywheels

$499

With the addition of our aluminum flywheel , you will have a dramatic increase in acceleration. The addition of our flywheel is the "best bang for the buck". Very street driveable.***Our flywheels are not hard to drive like some of the 8 & 8.5 pound race only units.***

Click Picture

***SR flywheels come with custom stepped dowels that cannot ever come loose, or fall out ***

Part Number AC-13127

Click Picture

Our flywheels are fully rebuildable, not like disposable steel and chrome moly flywheels which cannot be rebuilt*** We have all rebuild parts in stock.

11 pound Aluminum flywheels

$499

With the addition of our aluminum flywheel , you will have a dramatic increase in acceleration. While not quite the performance increase as it's 9.5# cousin, the 11# flywheel is a very good performance upgrade. The addition of our flywheel is the "best bang for the buck". Very street driveable.***Our flywheels are not hard to drive like some of the 8 & 8.5 pound race only units.***

Click Picture

***SR flywheels come with custom stepped dowels that cannot ever come loose, or fall out ***

Part Number AC-13132

Mazdaspeed Short Shifter
This is the best short shifter made. Back after popular demand. With this addition of this MazdaSpeed short shifter, your 1993-1995 Mazda RX-7 will shift smoother and quicker than ever. Very easy to install. (Takes about 15 minutes with hand tools.) Mazda factory piece.

 

$479

SALE $379

Only 1

at this price!

Part Number DR-11541MZSD

RX-7 Stainless Clutch Hose

With the addition of our stainless steel clutch hose, your RX-7 will have a stronger clutch pedal feel. It removes the spongy feel (actually flexing and expanding ) of the stock rubber hose. This just bolts on with simple hand tools to the RX-7.

$89

Part Number AC-13133

(10 bolt holes 2-5 years old) Turbo RX-7 Flywheel Rebuild Kit. (Replacement Friction Surface With all new Hardware) $179________Part Number AC-13150

7

(16 bolt holes) Turbo RX-7 Flywheel Rebuild Kit. (Replacement Friction Surface With all new Hardware) $179________Part Number AC-13151

7


Hardware Install kit $35 (needed for flywheel install ) ________Part Number AC-13135

Throw out bearing $159 ____________________________Part Number AC-13139

Pilot bearing $19 __________________________________Part Number AC-13142

Pilot seal $16 _____________________________________Part Number AC-13146 Alignment tool $15______________________________________Part Number AC-13148

Rear Main seal $19_____________________________________Part Number AC-13147

RedLine MTL Oil Qt/ $12________________________________Part Number AC-13031

Clutch Master Cylinder $169 ______________________________Part Number AC-13140

Clutch Slave Cylinder $159 _________________________Part Number AC-13141

 

Call or E-mail for all other cars

 


Mazda RX-7 pilot bearing puller

This is an absolute must-have tool when doing a RX-7 clutch swap.
It is rented for
$40 with clutch purchase . Deposit required and must be returned in good condition within 10 days.

`


Contact Us

Website designed by Brodie Peterson and SRM
Website maintained by SRM.
Site Map
Copyright 2000 SRx7.com. All rights reserved.