Mazda RX-8 Clutch & Flywheel


As seen in our Project Mazda RX-8

As seen in Turbo, Sport Compact Car and Modified magazine

2004 - 2010 Mazda RX-8
Complete Kit Includes all needed parts: Light weight flywheel, modified counterweight, hardware and bearing kit, pilot bearing, pilot seal, throw out bearing, alignment tool and Heavy Duty clutch set.
(race or street / strip)

***This performance clutch holds 50% more power than the stock unit which tends to slip ***
$799 Sale

Reg.$1137

Part Number RE-13120HD

**add $289 for 9.25# aluminum flywheel


2004 - 2010 Mazda RX-8

Complete Kit Includes all needed parts: Light weight flywheel, modified counterweight, hardware and bearing kit, pilot bearing, pilot seal, throw out bearing, alignment tool and Extreme clutch set. (race or street / strip)

***This performance clutch holds 110% more power than the stock unit which tends to slip ***

$829 Sale Reg. $1197

Part Number RE-13120EXT

**add $289 for 9.25# aluminum flywheel

Chrome Moly 14.5 pounds

Good

Lower cost, although not as much performance than the billet aluminum flywheel. 1 piece construction.

Billet Aluminum 9.25 pounds

Best

Slightly more money , but with much more performance. Fully rebuildable, with all parts in stock.

 

Click Picture

9.25 pound aluminum flywheels

With the addition of our 9.25# or 11.25# aluminum flywheel , your RX-8 will have a dramatic increase in acceleration.The addition of our flywheel is the "best bang for the buck for your Mazda RX-8". Very street driveable.***Our flywheels are not hard to drive like some of the lighter weight race only units.(The 8 pound racing flywheels that our competitors offer are too light for a Mazda RX-8 .Too hard to drive without slipping the clutch too much) ***See Below for needed counterweight and install hardware kit** Our flywheels are fully rebuildable, not like disposable steel and chrome moly flywheels which cannot be rebuilt*** We have all rebuild parts in stock, see below. These lightweight 6061 T6 billet SR Motorsports aluminum flywheels are designed to for the street, track or dragrace Mazda RX-8. They free up horsepower by reducing power robbing rotating mass. The stock flywheels are 23 pounds! Shifting is quick and sure due to the lightweight aluminum billet design. Longer transmission life can also be expected. The high carbon steel content of the replaceable bolt-on heat shield material helps to absorb heat and reduce the temperature of the mating parts. ***SR flywheels come with custom stepped dowels that cannot ever come loose, or fall out ***

Click Picture

***SR flywheels come with custom stepped dowels that cannot ever come loose, or fall out ***

$549

Part Number RE-21001

Heavy Duty RX-8 Performance Clutch Kit

55% Stronger than the stock RX-8 clutch. Kit includes: Clutch disc, pressure plate, throw out bearing, pilot bearing, pilot seal and alignment tool. This kit bolts on with simple hand tools to the RX-8 and replaces the factory unit exactly. Lasts many thousand miles longer than the stock clutch.

$689

Sale $459

Part Number RE-21002

RX-8 Factory OEM Clutch Kit

Factory OEM clutch kit. Includes: Clutch disc, pressure plate, throw out bearing, pilot bearing, pilot seal and alignment tool. This kit bolts on with simple hand tools to the RX-8.

$679

SALE $429

Part Number RE-21003

New 6-speed Mazda RX-8 Transmission
Factory Brand New 6-speed trasmission.

Part Number RX8-6750

 

List

$3600

Only

$2799


Modified Rebalanced RX-8 Counterweight

***Modified & Rebalanced Counterweight (needed for installation of an aftermarket flywheel on your RX-8 without changing front engine internal balancer ) With the addition of our Modified Counterweight your RX-8 retains the proper engine balance, without having to change the front internal engine balancer ( which requires that the engine be disassembled )This just bolts on to the rear of the RX-8 engine.

$189

Part Number RE-21006

RX-8 Stainless Clutch Hose

With the addition of our stainless steel clutch hose, your RX-8 will have a stronger clutch pedal feel. It removes the spongy feel (actually flexing and expanding ) of the stock rubber hose. This just bolts on with simple hand tools to the RX-8.

$89

Part Number RE-21008

Click Picture

Aluminum Flywheels
Available in our 9.25 and 11.25 pound design for the 2004-2009 Mazda RX-8. Our flywheels are fully rebuildable, not like disposable steel and chrome moly flywheels which cannot be rebuilt*** We have all rebuild parts in stock, see below. These lightweight 6061 T6 billet SR Motorsports aluminum flywheels are designed to for the street, track or dragrace Mazda RX-8. They free up horsepower by reducing power robbing rotating mass. (The 8 pound racing flywheels that our competitors offer are too light for a Mazda RX-8 .Too hard to drive without slipping the clutch too much) The stock flywheels are 23 pounds! Shifting is quick and sure due to the lightweight aluminum billet design. Longer transmission life can also be expected. The high carbon steel content of the replaceable bolt-on heat shield material helps to absorb heat and reduce the temperature of the mating parts. ***SR flywheels come with custom stepped dowels that cannot ever come loose, or fall out ***

   

(10 bolt holes 2-5 years old) RX-8 Flywheel Rebuild Kit. (Replacement Friction Surface With all new Hardware) $179________Part Number AC-13150

(16 bolt holes) RX-8 Flywheel Rebuild Kit. (Replacement Friction Surface With all new Hardware) $179________Part Number AC-13151


Hardware Install kit $35 (needed for flywheel installation ) ________Part Number RE-13135


Throw out bearing $89 ____________________________Part Number RE-13134

Pilot bearing $19 __________________________________Part Number RE-13142

Alignment tool $15___________________________________Part Number RE-13148

Pilot bearing Seal $16 __________________________________Part Number RE-13144

Main Rear Seal $39 __________________________________Part Number RE-13154


Mazda RX-8 pilot bearing puller

This is an absolute must-have tool when doing a RX-8 clutch swap.
It is rented for
$40 with clutch purchase . Deposit required and must be returned within 10 days in good condition.


   
   
   


Contact Us

Website designed by Brodie Peterson and SRM
Website maintained by SRM.
Site Map
Copyright 2002 SRmotorsports.com. All rights reserved.